Equipment introduction:

Tonghui tabletop coordinate screw machine using sheet metal welding frame, fuselage structure is stable, strong and durable. 2 worktables, which can realize the screw tightening alternately in cycle.  More efficient. If the screws are the same, it can be compatible with multiple products (only need to replace the fixture). The torque can be adjusted according to your actual needs. With suction feeding, stable performance and fast speed, It can tighten one screw every second, one machine can help you save 2-3 workshop staff

Product advantages:

1. The two working platforms can alternately play screws, the operator and the machine perfectly match, without any waiting time, to achieve higher production efficiency.

2. This machine is equipped with intelligent electric screwdriver, which can adjust the torque according to the actual production demand.

3. With automatic alarm function, if the screws are tightened NG.

4. This machine can compatible with other products (1, same screws, 2, replace the fixture, 3, adjust the tightening point)

5. This kind of machine can be matched with magnetic suction type, air suction type, air blowing type 3 different nail feeding mode (please tell us the screw specifications in advance, so that we can determine the specific nail feeding mode)

Applicable conditions:

1. It is best not to carry washers on the screws (if there are washers, please inform in advance).

2. It can be used with three different nail feeding methods: magnetic suction, air suction, and air blowing (please inform the screw specification and material in advance so that we can determine the specific nail feeding method)

3. The total length of the screw cannot exceed 25mm (if it exceeds, please tell us in advance)

4. The screw should not be too large, and the diameter of the screw is suitable for the range: M1-M6 (one of them).

5. You need a machine like this to take care of many different products (screws must be the same)

Cleaning and maintenance:

1. Before maintenance and cleaning, please make sure to turn off the power.

2. When the machine is not in use, it is necessary to turn off the power supply, air source and regularly clean the silo of the screw feeder to keep the silo clean.

3. Regularly replace the batch head. (Please replace the screwdriver head with the same size as the random one.)

4. If there is rust on the parts on the machine, please remove the rust in time, and spray some lubricating oil (must be done when the power and air source are turned off)

5. If your feeder is equipped with a brush, please replace or adjust the brush regularly. When the length of the bristles of the brush has been worn out to the point that the abnormal posture screws on the track cannot be removed, the height between the brush and the track needs to be adjusted, and the two fixing screws of the brush can be adjusted up and down.

6. In order to reduce interference with the arrangement of screws, please do not touch the rails in the bin at other times except for cleaning work.

7. If there is a major failure of the machine, please don’t disassemble it without authorization, and contact us in time.

Precautions for using equipment:

1. The screws poured into the silo of the screw feeder should not exceed the height of the lower plane of the feeder silo track, otherwise the machine will not work.

2. Each screw machine is dedicated to one kind of screw. Please use screws that match the specifications of this machine.

3. Three elements of machine stability:

A. Guarantee the quality of the screw as much as possible (screws must not have oil stains, and there must be no sundries in the silo of the screw feeder)

B. Regularly remove screws or foreign objects that do not meet the specifications in the feeder silo

C. Ordinary operators (non-professionals) can also troubleshoot problems such as simple material jams

4. The mechanical structure, components, rails, and distributors are all made of high-strength special heat-treated alloy steel and demagnetized. In order to reduce interference with the arrangement of screws, please do not touch the rails in the bin at other times except for cleaning work.

5. When the machine is in operation, please do not insert your fingers or foreign objects into the hopper of the screw feeder.

6. If the screw feeder alarms due to lack of screws, please turn off the power switch first, add screws and then turn on the power switch.

7. If the machine is not used for a long time, please turn off the power and air source. During use, if any abnormal phenomenon occurs, please turn off the power supply and air source in time, and contact us